Hi All,

I have a Sharp 2412 VMC with a Fanuc oi computer. I believe there are some canned cycles however the documentation is nasty at best. I am still very new to g-coding with about 6 months under my belt.

I want to mill a circle pocket (1.5” dia) and a rectangular pocket (2”x3”), both with the origin at 0,0, (two different parts) and using a 1/2” end mill. Both will be 0.025” in depth.

Can anyone advise me if there is a simple way to achieve this? Thanks very much in advance!
Larry

PS I also posted this in the G-Code section