Welcome!
I have just started the conversion of my BF20L. I will post pictures as the project moves along.
Manufacturer: www.optimum-maschinen.de
Machine: http://www.optimum-machines.com/prod...rio/index.html
Things I have done so far:
- Made Z-axis motor mount in steel
- Made block between Isel ball-nut and headstock
- Machined the ends of the Z ball-screw
- Made more room around the upper part of Z thrustbearing, and shimed the lower part of it with thin shrink tubing to snug fit
- Mounted the original thrust bearing for Z-axis under the top plate to eliminate slack.
- Made room for the Y-axis ball-nut in the base of the mill, and modified for 200mm Y-travel
- Made Y-axis motor mount in aluminium at the back of the mill
- Made a temporary housing for the controller
- Assembled the Z-axis and tested it. Lift 95kg easily (Me)
Parts used:
www.homeshopcnc.com : RS34-960 (3)
www.homeshopcnc.com : G203V (3)
www.homeshopcnc.com : Opto-isloated breakout board (1)
www.homeshopcnc.com : 65V, 12A Power Supply (1)
www.homeshopcnc.com : MPG 101B 28 Function Hand Controller + MINI-IO (1)
www.worldofcnc.com : ISEL 16 x 05 Spindle (X/Y)
www.worldofcnc.com : ISEL 25 x 05 Spindle (Z)
www.worldofcnc.com : ISEL3 16 x 05 (2)
www.worldofcnc.com : ISEL3 25 x 05 (1)
www.worldofcnc.com : ISEL Ballnut Housing 16mm Base (2)
www.worldofcnc.com : ISEL Ballnut Housing 25mm Base (1)
www.worldofcnc.com : ISEL Ballnut Wipers/Seals (3)
www.worldofcnc.com : Energy Chain (1 for X)
www.worldofcnc.com : SRJ-30C-RD-10 X 12.7 (2)
www.worldofcnc.com : SRJ-30C-RD-12 X 12.7 (1)
www.worldofcnc.com : Grease
www.fag.com : Extra thrust bearing for Z-axis
CNC Software:
www.artsoftcontrols.com : Mach 3
www.candcnc.com: Plugin for IO and MPG 101B
Credits to my cousin Jon, who is my mentor in mechanical engineering and design, and of course to all you posters on CNC Zone!