OK. My next step in my continuing saga of my cnc build is a coolant system. I found out today that I probably need one with the 1/8 and 1/16" carbide bits that I run. See my posting and temporary solutions here:

http://www.cnczone.com/forums/showthread.php?t=51816

I'm going to base this on Hoss's setup. A couple of questions:

1. How am I to drain the bed on the mill? Drill a hole at each corner of the bed? If so, how big of a hole can I go? 1/2"?

2. What coolant are you all running? I checked Enco and the stuff that have is a "mist" coolant. I am going to build a flood system.

Lets go from there....

Mike