I have a Leblond Baron 25 cnc lathe with fanuc 10T control; all of a sudden the control goes off and at re-start all I see is this

FS10TF 1314C
RAM PARITY ERROR

when I press RESET, I get this

PL

1 DUMP MEMORY
2
3 CLEAR FILE
4 SETTING
5
6 END IPL

I have all parameters backed up so that wouldn't be a problem;

I saw the next reply on somebody else's thread and I think I need the same kind procedure, only for my fanuc 10T




Hi !
please sure you have the parametre 900 series and also all machine parameter and diagnostig . in this situation you must clear all memory and set up the control system again please do as follow

1- turn off the control system .
2- press and hold down RESET and DELET and POWER ON key all together !
3- you see the many error on the screen , go to setting page and put the PWE to 1 !
4- firstly put the machine parameter from 0 to 20 and turn off and turn again !
5- then put the machine parameter nr 900 and turn off and turn on again
6- put the rest of control machine parametre and turn off and turn again
7 - its enough if to resart the control system if you dont have special hard ware or soft ware if you see any thing on screen please let me know

be happy with FANUC !

SBaghaei


What sould I do?

Thank you for your help

jolulank