I've recently got a Super X3 conversion from Syil UK, and the machine is mostly working fine. Had a little problem getting the home/limit switch settings right in Mach 3, but no drama. Am very happy with the machine !

My query concerns the slowness with which the spindle spins up when under Mach 3 control. Under manual control, the spindle gets up to top speed in under 5 secs, whereas when the PC controls it, it takes about 30 sec. There's a similar difference in spin-down rates too. I've adjusted the dwell settings in Mach3, to ensure the correct spindle speed before starting my cuts, but I guess I'm just impatient !

Anyone else had this issue ?

Cheers,

Chris