I have 3 Relience E712 Servos. Will this transformer provide enough current? Should I just get a 12Kva? One of the many things that confuse me is the 60v ~22amp output, then it goes on to say 11.5 amp output. I noticed several people on the forum have these motors. What transformers do you use?

BTW is this a good price?


http://cgi.ebay.com/ws/eBayISAPI.dll...sPageName=WDVW

My machine has 53"X34"X6" travel made of alu. plate thomson bearings 1" on X 3/4 on Y I added the material, motors, router, etc and the gantry weighs about 130 lbs. I plan on cutting 3/4 Oak, Mdf, Pine.

Thanks