Hi,hello.
looking for a good cheap encoder
http://catalog.digikey.com/scripts/d...me=102-1307-ND
it works perfect and gives you the opportunity to change the resolution with 4 microchips
also the axe system is very smart and it cost 30 us$ for 48 to 2048 lines !!!
on my hp board
Replaced C28 with 4.7uF/25V tantalum cap.
Replaced R54 with jumper wire
Placed 1N4148 between R54 and GND, cathode facing GND
my motor is 180v 8Amp cont. should I replace r21 also ?
Great info about the encoders & great price !
Thanks for sharing !
cnc2.