I'm getting accumulation in X+, Y- & Z+.
I put up a page on my site that might help explain better than words.
http://www.bluumax.com/Taig.html
I've had this problem since I got the mill a year ago, I've tried everything I can think of.
I've checked & re-checked the Mach settings, but still might have missed something.
Hope someone can help with this.


Taig 2019ER
Xylotex 3 axis drive & 269 oz/in motors
CNC4PC C11 Breakout board
Mach3 latest ver 3.037
Mill only PC: P4 266, 724MB

Shawn.