Hello,

So I got my machine hooked up with single phase power and can program and cut parts using the controller, but I can't get a computer connected to it. I have read all that I can find on the internet for connecting a computer. I have tried a null modem cable, and making my own cable. I have tried Hyper terminal and a program called dnc server. I set the settings at 1200, 7, 2, even, x on x off and also with a 600 baud rate. I can't get any interaction both send files from the computer and sending to the computer. Hopefully someone can help. The only other option I have is the tape drive, no floppy. Thanks