603,425 active members*
2,921 visitors online*
Register for free
Login
IndustryArena Forum > Employment Opportunity / RFQ (Request for Quote). > Employment Opportunity > RFQ: Small (3"x5"x1/2") part from dimensioned drawings in Aluminum or stainless
Results 1 to 7 of 7

Threaded View

  1. #1
    Join Date
    Jun 2008
    Posts
    20

    RFQ: Small (3"x5"x1/2") part from dimensioned drawings in Aluminum or stainless

    The part shown in the image is one of four parts that I would like to have rendered in aluminum or stainless steel. This is the most complex of the four parts. I can provide only 2D dimensioned drawings and you would have to either redraw the object in your CAD software or program it directly into your CAM software.

    I have a 1.5MB .zip file that I will send you if you PM me with your email address. It contains 1:1 dimensioned scale drawings in pdf format as well as a detailed description of the parts and specifications in a Word document.

    I'm looking for one set of the parts as a prototype. The 'production run' will be limited to about 3 to 9 sets. Each set has four parts. Two of the parts are like the one shown, the other two are not as complicated. The number depends on the cost per set as more are made. (feel free to suggest a price for up to 15 sets if you like, but I don't think I can use more than that).

    I would like to have an estimate of the cost and time to make the parts.

    This project has been discussed here:
    http://www.cnczone.com/forums/showthread.php?t=59915
    and here:
    http://www.cnczone.com/forums/showthread.php?t=59938
    Attached Thumbnails Attached Thumbnails Middle plate perspective.jpg  

Similar Threads

  1. "low end" HF Spindle or "high end" router for about $1000?
    By biomed_eng in forum DIY CNC Router Table Machines
    Replies: 14
    Last Post: 01-06-2012, 07:15 AM
  2. BattleAxe "aka" Ball and Chain "aka" the wife.
    By ZipSnipe in forum Community Club House
    Replies: 48
    Last Post: 05-18-2008, 03:53 PM
  3. G320 "common" or "+5vdc" why do they vary?
    By beezerlm in forum Gecko Drives
    Replies: 3
    Last Post: 01-12-2008, 11:00 PM
  4. Questions on building small (18" x 24" x 3") machine
    By bikedude880 in forum DIY CNC Router Table Machines
    Replies: 4
    Last Post: 08-01-2006, 03:04 AM
  5. Vertical system "jerks" and "bangs"??
    By REVCAM_Bob in forum Servo Motors / Drives
    Replies: 5
    Last Post: 06-12-2006, 03:09 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •