603,957 active members*

3,983 visitors online*

Register for free

Login

IndustryArena Forum > MetalWorking > Welding Brazing Soldering Sealing > My Homemade TIG welder

Thread: My Homemade TIG welder

Results 1 to 20 of 192

Thread Tools
Search Thread
- Advanced Search
Display
- Switch to Linear Mode
- Switch to Hybrid Mode
- Threaded Mode

Threaded View

js530 My Homemade TIG welder 06-28-2006, 05:46 AM

js530 No pictures on this update,... 07-04-2006, 06:39 AM

2muchstuff Do you have a wiring... 07-04-2006, 06:47 AM

siciunas Arc starter 01-20-2010, 01:40 AM

iEdd Thanks for that, I was... 01-20-2010, 09:01 AM

siciunas Arc Starter 01-20-2010, 06:34 PM

Hamadamj Very interesting ! 07-04-2006, 09:11 AM

sanddrag I'd like to see a bead you've... 07-04-2006, 09:35 PM

js530 When I do start welding, I... 07-04-2006, 10:41 PM

diarmaid Wheres the thread on your DIY... 07-04-2006, 11:21 PM

slappynuts Exactly my thoughts. You... 02-18-2009, 04:01 AM

slappynuts Here is the answer to all of... 02-18-2009, 04:13 AM

iEdd Yep.... 02-18-2009, 04:15 AM

slappynuts Well isnt this part just a... 02-18-2009, 04:39 AM

More replies below current depth...

js530 Some new pictures. Sorry... 07-06-2006, 06:30 AM

vulcom1 I am also very interested in... 07-06-2006, 02:48 PM

toolmanx I was reading through your... 04-04-2013, 12:52 AM

js530 The HF suppression caps are... 07-21-2006, 08:40 PM

diarmaid Great work. Its certainly... 07-22-2006, 06:26 PM

js530 I finally had a chance to run... 07-24-2006, 04:16 AM

dapug home made welder 07-16-2010, 11:44 AM

js530 Sorry for the long wait, but... 08-08-2006, 05:00 AM

js530 A few more pictures It... 08-09-2006, 04:55 AM

lwill What shield gas are you using... 08-09-2006, 05:09 AM

js530 Straight argon and pure... 08-09-2006, 05:15 AM

Ed VanEss Learning to Tig weld 11-02-2006, 06:36 AM

crease-guard All of the above advice is... 11-11-2006, 12:50 PM

Ed VanEss alum welding 11-11-2006, 08:28 PM

miljnor all that is good but it looks... 08-09-2006, 05:33 AM

lwill The oxidation on the AL can... 08-09-2006, 05:37 AM

js530 I'm using AC, which is why I... 08-09-2006, 06:05 AM

lwill You definately have to use... 08-09-2006, 06:27 AM

Corvus corax You will probably find it... 08-14-2006, 03:51 AM

motomitch1 surface oxidation needs to be... 08-14-2006, 05:02 AM

js530 I've been using a helmet (for... 09-27-2006, 03:34 AM

dumaster hello js530 I found this... 10-28-2006, 03:59 AM

dumaster it has some friend to help me... 11-02-2006, 04:30 AM

ozzie34231 Hi All, Would someone spell... 11-11-2006, 09:02 PM

Ed VanEss welding alum 11-12-2006, 03:48 AM

diarmaid How 'small' exactly is your... 11-13-2006, 11:36 AM

Mortek Here's a sample of a project... 11-17-2006, 06:33 AM

ninefinger Homemade TIG 11-18-2006, 03:03 AM

diarmaid Nice welds Mortek 11-17-2006, 09:23 AM

diarmaid Wow! Thats such a great link.... 11-18-2006, 01:04 PM

s_c_engineering your welder would work a lot... 02-16-2007, 05:24 PM

tadream That was something that I... 02-25-2007, 12:17 AM

D_ego help. 03-05-2007, 06:42 PM

venomx999 what a crazy creation! if it... 03-08-2007, 05:06 AM

venomx999 I was referring to the link... 03-08-2007, 05:15 AM

punisher454 Okay, my first post here. I... 09-11-2008, 07:44 AM

OrionBlade2003 Spark plugs - USE NGK SPARK... 12-26-2008, 07:42 AM

iEdd Uh... ****. I bought... 12-26-2008, 07:48 AM

OrionBlade2003 If all you have... 12-26-2008, 08:26 AM

iEdd Looks like I will have to buy... 12-28-2008, 09:48 PM

OrionBlade2003 I'll have to look at the... 12-29-2008, 05:22 AM

integerspin Think someone wanted to see... 12-29-2008, 05:48 AM

OrionBlade2003 Pics? 01-02-2009, 08:36 AM

integerspin I will have to move some... 01-02-2009, 06:49 PM

OrionBlade2003 Thanks, boson. 01-02-2009, 08:44 PM

iEdd js530, and anyone else that... 01-26-2009, 01:33 AM

iEdd Low MHz preferably. I think... 12-29-2008, 06:41 AM

brainstatic Just a word of caution... 12-29-2008, 08:44 PM

iEdd Mine are. ;) The place I... 12-29-2008, 10:37 PM

OrionBlade2003 Yee haw! 01-02-2009, 08:39 AM

iEdd Anyone looking for the... 01-02-2009, 09:22 AM

OrionBlade2003 Aww, hell! 12-29-2008, 05:39 AM

MrWild EXCELLENT! I'll be looking... 09-14-2008, 05:26 AM

thkoutsidthebox I'll second that! :) Pics are... 09-14-2008, 11:25 AM

punisher454 I am working on several... 09-15-2008, 07:33 PM

marcgvky Amy word on your build? 12-08-2008, 05:54 PM

punisher454 Not yet, I have most all of... 12-09-2008, 10:28 AM

integerspin I don't know if it would be... 12-12-2008, 04:29 AM

iEdd Yes, please post your... 12-25-2008, 08:22 AM

graflex The HF non touch arc... 12-29-2008, 09:21 PM

nutchanon this schematic can make tig... 05-26-2009, 07:56 PM

mecanno i have built an similar arc... 07-07-2009, 05:52 PM

Stanislaw Krasi TIG 10-15-2009, 01:03 PM

ozzie34231 Hi All, I see this thread... 10-19-2009, 04:15 PM

Stanislaw Krasi TIG AC/DC 400A 10-19-2009, 06:00 PM

iEdd 1. Try running the Polish... 10-19-2009, 09:17 PM

djowen41 Hi guy i have read this... 10-20-2009, 07:19 AM

iEdd I hope not! That's what I'm... 10-20-2009, 07:25 AM

Stanislaw Krasi Home Made AC TIG weld in... 10-21-2009, 05:32 PM

Stanislaw Krasi ROV 10-21-2009, 06:08 PM

Stanislaw Krasi ROV 10-21-2009, 06:11 PM

ozzie34231 Thanks iEdd, That clears... 10-22-2009, 05:22 PM

Hawkins Hello, Im new to CNC... 12-06-2009, 04:28 AM

iEdd Thanks for posting that. Hmm,... 01-20-2010, 09:56 PM

siciunas Arc Starter 01-20-2010, 10:23 PM

Stanislaw Krasi Look... 01-22-2010, 06:16 PM

Stanislaw Krasi PULS TIG DC 01-23-2010, 09:32 AM

iEdd Thanks for trying to help,... 01-23-2010, 09:47 AM

siciunas Arc Starter 01-27-2010, 01:52 AM

siciunas Arc Stater 01-27-2010, 01:54 AM

Orvillefpike Arc Starter 01-30-2010, 05:29 PM

More replies below current depth...

More replies below current depth...

iEdd Won't the fact that you're... 02-02-2010, 09:45 PM

siciunas Arc Starter 02-03-2010, 01:17 AM

siciunas Arc Starter 02-04-2010, 03:03 AM

Orvillefpike Arc Starter 02-05-2010, 06:11 PM

More replies below current depth...

iEdd It's because your body is... 02-07-2010, 10:39 PM

Orvillefpike Arc Starter 02-08-2010, 01:09 AM

siciunas Arc Starter 02-08-2010, 03:58 PM

Orvillefpike Arc Starter 02-08-2010, 04:04 PM

More replies below current depth...

iEdd Side note: If you want to... 03-02-2010, 12:14 AM

dr pepper Cool thanks for sharing that,... 03-02-2010, 02:41 PM

siciunas Arc Starter 03-02-2010, 04:40 PM

dr pepper Yep I think I have got a good... 03-02-2010, 05:36 PM

More replies below current depth...

iEdd Yeah, it's actually some... 03-03-2010, 12:57 AM

dr pepper Yep thanks for that iedd a... 03-03-2010, 02:58 PM

iEdd Careful with the plug leads.... 03-03-2010, 10:20 PM

dr pepper Thanks for the warning I did... 03-03-2010, 10:35 PM

iEdd Good stuff. So the rigged MOT... 03-04-2010, 02:14 AM

dr pepper Yep I see what you mean,... 03-04-2010, 03:00 PM

bill south Hey Guys; Just a quick... 03-04-2010, 03:38 PM

dr pepper You can buy them, allthough... 03-04-2010, 05:55 PM

Orvillefpike Usually, on a car ignition... 03-06-2010, 01:07 AM

iEdd I think in a car, you are... 03-06-2010, 03:25 AM

More replies below current depth...

Raban If anyone interested, here... 07-06-2010, 11:20 AM

kaighn80 sorry to dig this up but 07-07-2010, 08:56 PM

dr pepper Mine does work now, only its... 07-08-2010, 09:14 PM

kaighn80 cool im looking to build one... 07-08-2010, 11:04 PM

moking I would like to use a stick... 07-09-2010, 04:42 PM

dr pepper You dont have to use... 07-13-2010, 10:22 PM

samwelds Re: My Homemade TIG welder 05-31-2024, 12:22 PM

electric2u question maybe wroung place,... 07-17-2010, 11:41 AM

dr pepper Dapug yes thats correct, mine... 07-25-2010, 06:57 AM

kaighn80 [QUOTE=dr pepper;803289]Dapug... 07-25-2010, 08:44 AM

dr pepper Ok I searched through my... 07-26-2010, 01:42 PM

More replies below current depth...

moking Hi kaighn80, ... 08-13-2010, 06:31 PM

Bebetto Hello, I am new to this forum... 09-04-2010, 04:22 AM

packrat The AC for Tig welding... 09-04-2010, 05:15 PM

jdchmiel I just found this thread and... 09-24-2010, 07:00 PM

dhruvpandit hi there, i am from india,... 10-09-2010, 02:39 PM

gfioro successfull replica 01-19-2011, 08:46 PM

iEdd Looks pretty good, gfioro. ... 01-19-2011, 11:53 PM

Raban our plan of ac dc tig welding... 02-27-2011, 05:04 PM

Raban HF/HV stage working see... 04-30-2011, 10:37 AM

kaighn80 so does any one have a full... 04-30-2011, 05:17 PM

Josue Tortola Hi Guys!!! This is my first... 02-16-2012, 05:14 AM

gfioro The HF current used in an arc... 02-16-2012, 08:20 PM

Josue Tortola gfioro! Thanks for the... 02-16-2012, 10:59 PM

kaighn80 so does anyone have a working... 02-16-2012, 11:26 PM

gfioro Kaign80: there are some open... 02-17-2012, 03:04 AM

Josue Tortola gfioro!!!! You might build a... 02-17-2012, 05:03 AM

gfioro Jaja si, soy de Argentina.... 02-17-2012, 04:21 PM

burt007 Here is the pdf file 03-15-2012, 09:30 AM

burt007 Here is the pdf file 03-15-2012, 09:31 AM

Josue Tortola Si soy de Guatemala!!!!... 02-17-2012, 04:33 PM

burt007 Here is the whole plan for... 03-15-2012, 09:27 AM

jurgen4 Re: My Homemade TIG welder 08-26-2014, 12:09 PM

55 dude Re: My Homemade TIG welder 10-22-2014, 04:37 PM

Previous Post

Next Post

01-02-2009, 08:39 AM #11
OrionBlade2003

View Profile

View Forum Posts

Registered
Join Date

Dec 2008

Posts

30
Yee haw!

Originally Posted by brainstatic

Not all NGK spark plugs intended for "street" autos are non-resistor type. My Jaguar V12 uses an NGK resistor plug. I would think best to contact NGK before purchasing.

From their website:
Technical Support
hours: 8:30am - 5:00pm Monday-Friday EST
tel: 1-877-473-6767 prompt #2

http://www.ngksparkplugs.com/About_nGK/contactus.asp

Dats wha we use dem dere race plugs. Makes dem 'lectrawns go faster.

:banana:

Reply With Quote

Quick Navigation Welding Brazing Soldering Sealing Top

« Previous Thread | Next Thread »

Similar Threads

Welder just going into CAD !!

By UK SITE WELDER in forum Community Club House

Replies: 2
Last Post: 11-08-2013, 09:34 PM
mic or tic welder

By letref in forum Community Club House

Replies: 1
Last Post: 07-01-2013, 06:17 PM
dc stick welder to tig welder

By kaighn80 in forum Welding Brazing Soldering Sealing

Replies: 12
Last Post: 08-27-2010, 12:43 AM
welder

By popppop in forum CNC Machine Related Electronics

Replies: 9
Last Post: 03-31-2009, 07:58 PM
Welder

By Mr.Chips in forum Welding Brazing Soldering Sealing

Replies: 12
Last Post: 02-07-2007, 09:04 PM

Tags for this Thread

far, not, power, since, tig, transformers, triac, wan, welder

Posting Permissions

You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
[VIDEO] code is Off
HTML code is Off

All times are GMT +1. The time now is 06:12 PM.

Powered by vBulletin® Version 4.2.5
Copyright © 2025 vBulletin Solutions Inc. All rights reserved.