Dear all,
Advice please.....my machine OKK with fanuc 6m control can't recognize any g-code (like G02,G03, ~only recognize G01 & canned cycle drill can't run to) & m-code (M30), i dunno what's wrong with my control
I already try & replace using makino with fanuc 6M parameter but it's not compatible (can't recognize Zero point) at all & still can't using G-code & M-code, but in Makino it's can use that G-code & m-code... it's so confusing
Please! someone help me solve my problem & forgive me coz my english is bad.

Thanks