I have been tring to gather as much information and feedback as possible about these two mills. I have plenty feedback about the Tormach but i am lacking feedback about the Novakon. I have read the " I have a novakon nm-200 ask me a question" thread and it sounds like he was having some spindle bearing problems. Yes, he got that problem resovled but in one of his last post he said he was only able to achieve 3000 rpm and they advertise 4000 as a max. really the only advantage i see with the novakon is the table size and travel. any input between these two machines would be greatly appriciated and thanks.