hello,

Can any one help me with a Huanyang HY02D223B 2.2Kw VFD and Spindle. I live in the uk and have conected the power supply (Dometsic 240v) to R and S terminals. The drive powers up, the fan doesnt run (don't know if it should or not til the spindle is running)
The drive displays an error 'E.Lu.S', from other sources I believe this means either. a, Phase missing, b, Lower voltage c, sudden change in direction.
I have tried almost everything with the dp00? config, but cant seem to get any further. Has anyone else had this Fault?

I'm I missing a trick, after changing settings should I just be able to press run and the spindle starts, stop and it stops. I have had the drive configured for Operator control and external, but still get the error!!

Best regards

Christian