hI all ive got these motors

http://www.motioncontrolproducts.com...per-motors.pdf

it says the wires are 20awg each and as you know u pair them so they share the load no heres me question i have some 1.00m2 (24awg 5 core lapp cable that im going to use so im going to cut the wires that are on the motors now as they are to short any way and solder these on instead but as the are a single 24awg wire haveing to cope with x2 20awg wires normaly will it be a problem?.

p.s the extra core from my 5 core lapp cable will be an earth back to me driver box etc.

cheers