Im trying to cut a 2in bar of aluminum in the VMC.
I am rounding the corners w/ a 3/4in dia, 3in cutting length endmill
I am getting chatter w/ any feedrate faster than 5ipm
Spindle is 1000rpm
Can I use a 3/4in dia but with a 3/4in cutting lenght for better rigidity and cut the bar using multipasses? Or will the sides of the endmill rub when I cut passed the 3/4in mark?
-Park
Results 1 to 5 of 5
Threaded View
-
09-22-2009, 09:59 PM #1
Registered
- Join Date
- May 2006
- Posts
- 16
can an endmill cut longer than it's cutting length using multipass
Reply With QuoteSimilar Threads
-
Longer parallel cable or longer steper wires?
By jvanick in forum Hobbycnc (Products)Replies: 12Last Post: 09-13-2008, 11:51 AM -
Plunge cutting indexable endmill
By orionstarman in forum Uncategorised MetalWorking MachinesReplies: 2Last Post: 03-23-2008, 01:50 AM -
Table length cutting problem?
By Blacksunshine in forum WoodWorking TopicsReplies: 4Last Post: 03-14-2008, 02:00 AM -
1/32 Endmill cutting aluminum?
By DennisCNC in forum MetalWork DiscussionReplies: 5Last Post: 12-27-2005, 06:22 AM
Posting Permissions
