We have a MAtsuura RA-1 with a Yasnac MX3 control.

The machine stop and get in alarm while working.

Alarms are
Emergency Stop 330
and Servo off

We are not able to get the machine back on

We are not seeing any alarm leds on both servo drives and spindle drives.

Anybody have an idea?

Also, if somebody here have the same machine I miss the 3 last pages of the RA-1 operator manual and this may help me with this problem.

Those pages are reffering on how to get the machine back on after various situations.

section missing from my manual is
7.5.4 7.5.5 7.5.6

This is only two or 3 pages so if anybody could scan me that, this could be of great help.

Thanks