Good morning anyone: I am trying to edit an OKUMA LATHE post processor.I am trying to get it to output tool monitoring code at the tool change statement. ( VLMON[3]=3 ) and ( VLMON[3]=0 ) before the next tool change. It would look something like this:
T0303
VLMON[3]=3
G96S39M03M41
G0X0.Z3.175M08
G95G1Z-54.893F.302
G0Z3.175
M09
VLMON[3]=0
G0X250.Z250.
T0404
VLMON[4]=3

Any help would be greatly appreciated!
I am really struggling with this!
[email protected]