We have a Puma 8s lathe P/N PM8S0295..we lost parameters while changing out batteries, but have manually input System para's per the print out we rec'd with the machine when we purchased it used. Have cleared most errors but the Spindle Amplifier is showing error code "34" (para out of range)..we have tried to input para 6519 to 00000010 and 00000110 which should cause a reset but have been unsucessful. Also having problem with error 408 and 409 re: Servo alarm serial error. Can anyone help ? Also is there any "Master list of Parameters" for this machine/controller. We have not input or changed any of the Diagnostic parameters since losing para's ?? Do we have to input both the System and Diagnostic para to get the machine back up and running ??

Thanks for any input,

Bob