I've searched everywhere for this... I just bought an '05 TM1 w/ atc and I found the settings to up the spindle speed to 6000rpm, but I have been unable to locate the proper settings to increase the rapids.

I have been told that you can set the rapids up from 200ipm to 600ipm.

Anyone know what to change? It does seem like a big increase... thoughts on this?

Here are the spindle settings for those wondering:

131-MAX SPINDLE RPM
183-Sp MAX FREQ

(PAR 183= MAX SPINDLE SPEED / 3 * 10)

So for 6000 RPM:
131 = 6000
183 = 20000