Hi to all gurus of swiss machine. Could somebody help me with a problem on L25 citizen V II?
This is the problem!!. I'm running a 17 mm stainlees steel annealed 17-4 PH and its broke a lot of tapping tools (VEGA xhp-mb 10-32 threat) ann I drill it with a # 19 (.166) carbide.This is the part of the program.
M23 $2=300
T3300
G0 Z-.05 T33
G84 Z.570 R.03 F.03125 S300R1
G80
B3 ( oil pressure )
G4 X2.
B3
G99
M25
T3000
M16
M99
So, any recomendation, am I ok on feeds and rpm's? There is a better tapping tool? Thanks a lot guys.