I need to make a CNC to cut thin aluminum .0197 thick or .5mm. table would need to be 76 inch long by 36 inch wide. I would want it to be very acurate and repeatable percison every time and does not need to be fast but need to be dead on every time.

I have the plans for the JGRO and the JOE 2006. I have the ability to make the frame out of steel or very thick 2024 alum. need to have good long lasting steppers or servos and able to import files from others with a simple as posible plug and play kind of format.

Anyone out there up to the challange to help me design this thing or have a set of plans that will support what I need so I can get to building the table. It will be used for making aircraft parts for my aircraft.

Any and all help would most appreciated.

Dan