Hello,

Have been working on a delicate project involving cutting 1/4 acrylic sheet
with vinyl and VHB tape on the back...
The laser seems to be burning the vinyl a little, possibly because of the slender width of the lettering, but I have to run the at the speed and power I have been in order to cut all the way through the material.

Just wondering if any knew if it was possible to paint one side of the acrylic and then laser cut it - to achieve a similar effect as the vinyl.

Maybe a water based latex paint? one coat, a light sanding and then a second coat was an idea I had.

Please let me know and thanks for reading,

-M