Hi everyone. I have been building a fogless coolant mister and I thought I would share how I did it. Most materials are available at a home improvement store. I have rigged up a solenoid valve which I can actuate from EMC2. I am pretty pleased with the result, and the total cost was about $120 dollars.
Let's get started:
Step one: Go shopping (any home improvement store will get you started).
I started with the following:
Inline water filer canister (you can bin the filter as all you need is the filter)
Some 1/4 inch compression fittings
Some barb fittings
Some 1/4 inch rubber tubing (length will depend on your machine)
Various pipe fitting (plan on making a few trips)
An air pressure regulator