Would there be an issue with running an AC power cable (to a router) in the same cable carrier as the motor cables and limit switch cables? I am wondering if there is any possibility of interference or damage resulting from the proximity of these various wires.

If it matters, the motor driver is a Gecko 540 and it will be driving three 280oz steppers. I don't know what kind of power supply I'll be using yet (linear vs switching) but if that matters please feel free to chime in. Also, and I know this isn't very related to the topic, but if you have any recommendations on which type of power supply to use I would really appreciate it. I've searched these forums and have no found any suitable answers.