I am relatively new to machining and am having problems getting with the programmed feed rate. If I post more than one tool such as a roughing pass and then a finishing pass the second tool (and all following tools if there are other sequences) runs at roughly 65 to 70% of the programmed feed rate. The control displays the called feedrate as it is programmed, but the actual feed rate is reduced just like you turned the feed override knob down. If anyone knows what needs cancelled or changed after the first tool sequence I would greatly appreciate the help! My control is a Fanuc OiM control and it is on a 2004 Hardinge VMC 1250II.