Aloha all,

I just got the X and Y motors connected to the X2 using the Hoss designs. I tried to screw in the rubber bellows / cover thingies (it's an industry term..) but with the 4.7" of y travel, the rubber gets folded up when approaching the limits. It jambs between the saddle and the motor mount on the front side of the y axis and between the column mount casting and the saddle on the back side.

Any suggestion on how to rig these bellows or something else to use? seems it would be a bad idea to leave the ball screw exposed to the swarf...
Thanks! -4ist