I'd put a lot more ribs in that gantry beam. Here's a pic of mine. 12"x40", 3/4" Baltic Birch.
http://www.cnczone.com/forums/attach...0&d=1109818854
Results 1 to 20 of 25
Threaded View
-
06-26-2010, 01:44 PM #12
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With QuoteSimilar Threads
-
Easy to build torsion box and rails
By lgroulx200 in forum DIY CNC Router Table MachinesReplies: 17Last Post: 11-21-2012, 06:37 PM -
"Home-made" V-groove rollers and rails
By Gerald_D in forum Linear and Rotary MotionReplies: 10Last Post: 06-14-2008, 08:02 AM -
Bought "NEW" rails & blocks on EBAY .... maybe not NEW
By NC_jimbo in forum Linear and Rotary MotionReplies: 5Last Post: 04-25-2007, 07:45 PM -
55" rails on ebay
By juzwuz in forum DIY CNC Router Table MachinesReplies: 2Last Post: 11-07-2005, 03:23 PM -
2 63" thk rails for $12
By tltaylor in forum DIY CNC Router Table MachinesReplies: 4Last Post: 12-08-2004, 05:58 AM
Posting Permissions
