Dear All
In my CNC Fanuc controll machine, Problem is 401 VRDY OFF. No any larm showing in any drive.All card showing "-" not ready.All limit switches cables & supplys are ok.There are Ac motors.(Brushless).Plz help me.
[email protected]
Best regards
Shahid
Results 1 to 20 of 82
Threaded View
-
08-01-2010, 08:26 AM #30
Registered
- Join Date
- Aug 2010
- Posts
- 0
401 VRDY OFF
Reply With QuoteSimilar Threads
-
Opinions: Integrating Nikken 5AX-120 4th/5th axis on Excello 605 with Linux CNC
By torinwalker in forum Uncategorised MetalWorking MachinesReplies: 0Last Post: 04-16-2013, 06:44 PM -
I deleted the firmware from my DSP controller
By ravafenice in forum Commercial CNC Wood RoutersReplies: 1Last Post: 09-10-2011, 07:06 PM -
Deleted. NT
By g-codeguy in forum MetalWork DiscussionReplies: 0Last Post: 10-01-2008, 02:31 AM
Tags for this Thread
Posting Permissions
