Hellow again folks....I have another question.
I just received my first set of linear rails and bearing blocks. It's a Rexroth Linear Motion system (eBay find). They were removed from a working system and were only wiped clean. There is a lot of great and gunk all around the blocks.
Can I removed the blocks from the rails without letting the bearings loose?
Should I use a solvent to clean them or something line WD40?
If I can remove the blocks should I soak them in cleaner and then what do I grease them with?
I've tried to "Google" this but I am obviously looking up incorrect terms or something....
Results 1 to 6 of 6
Threaded View
-
10-29-2010, 04:26 AM #1
Registered
- Join Date
- May 2009
- Posts
- 264
Cleaning Linear rails and bearing blocks
Reply With QuoteSimilar Threads
-
THK SNS 25 Linear Rails and Bearing Blocks 53' long
By clembrant in forum For Sale OnlyReplies: 0Last Post: 06-19-2014, 08:18 PM -
review of chinese rails and bearing blocks from Econvience
By ajwaverider in forum Linear and Rotary MotionReplies: 0Last Post: 03-31-2013, 03:14 AM -
Supported Rails + bearing blocks from Ebay
By kiwichris in forum DIY CNC Router Table MachinesReplies: 12Last Post: 06-26-2011, 02:48 PM -
Where to get Linear rails and blocks?
By gunlocators in forum DIY CNC Router Table MachinesReplies: 3Last Post: 08-09-2008, 02:55 PM
Tags for this Thread
Posting Permissions
