Hi all. I am about to Convert my X3 mill and my g0602 lathe to CNC control. Here are all of the threads that I read about converting the X3:

Bob Berg
09-14-2004
DIY
Servos with 5/8" 5 TPI Rockford Standard Grade Ballscrew and Ball nuts
CNC Conversion of a Sieg X-3 Mil

jl123
07-06-2006
CNC Fusion kit
3 Gecko 202 + G100
Pics of ball screw ends on page 11
http://www.cnczone.com/forums/bencht..._them_all.html

Greolt
08-15-2006
Syil conversion kit
http://www.cnczone.com/forums/syil_p..._kit_syil.html

S_J_H
09-24-2006
DIY
http://www.cnczone.com/forums/bencht...its_alive.html


cadmonkey
06-08-2008
DIY NOOK screws
G203V drives
300 oz, 300 oz, 600 oz 2.6:1 for x,y,z
http://www.cnczone.com/forums/bencht...onversion.html

Matt McColley
03-12-2009
DIY screws
First attempt at N34 Z axis
http://www.cnczone.com/forums/bencht...d_odyssey.html

MRM RCModels
02-26-2008
CNC Fusion x3 delux kit with Crevice Reamer G540 option
3 Gecko drives 203V
2 425 oz Stepper Motors (x and y)
1 640 oz Stepper Motor (z)
1000W Power Supply w/ 12v & 5V outputs (1)
http://www.cnczone.com/forums/bencht...usion_kit.html

Eternal
08-11-2010
CNC Fusion x3 delux kit with Crevice Reamer G540 option
G540
2 Keling KL23H2100-35-4B 381 oz (x and y)
1 Keling KL34H295-43-8A 906 oz N34 motor for Z
Keling KL-350-48 48V/7.3A PSU
http://www.cnczone.com/forums/bencht...ill_build.html

CreviseReamer
Date unknown
CNC Fusion x3 delux kit
Page 29

-----------------------------------------------------------------------------------------------------------------------------------
And here are all I have read about the G0602:

derekbackus
Start date:06-10-2008
Started with:
CNC4PC C11 Multifunction Break-Out-Board
- CNC4PC C21 Voltage Regulation Unit (supplies power to the C11 board)
- Xylotex 3 Axis Bipolar Stepper Motor Driver "Kit" With Power Supply, 269oz/in Steppers.
then switchwed to Gecko Drive
http://www.cnczone.com/forums/vertic...onversion.html


Crevice Reamer
Start date: 06-02-2010
Stock screws
G540
Modified Keling 270 motor for X
Keling 381 motor for Z
Keling 48V PSU
Hall Effect indexing sensor and Home switches.
http://www.cnczone.com/forums/vertic...onversion.html


Steelpolish
Start date: 12-08-2009
2 Gecko 203V
2 425 oz.in. Nema 23 Stepper Motors
http://www.cnczone.com/forums/vertic...onversion.html
-----------------------------------------------------------------------------------------------------------------------------------

If you know of any other threads that I should look at please let me know.