This is my final try...

I've had a TMC-1000, for a few years, even posted here a couple of years ago, but no luck. If I don't figure it out this time, it's going in the trash, or wherever these things go when they become giant paperweights (on the sale list and/or E-Bay) Anyway, here we go:

1. It used to work, I used it at work almost every day.

2. One at a time, the axis drive motors quit working.

3. When in Manual Mode, I can get the Spindle Motor to rotate.

4. If I give it an axis motion, I can hear the hum change pitch. The contoller counts as if it is moving, yet nothing moves. If I hit the "space bar" on the screen, it sounds like a hard stop is being hit.

5. If I open the cover, the indicator tells me, so that seems to be working.

6. Yes, I pulled the "E" Stop.

Again, one last try...

Any help would be MUCH appreciated.

Thanks,

Jerry