Hi!
I'm looking for somebody to give me quote to supply & machine 22 panels for a recording studio, in 3mm aluminium similar to this: http://www.redco.com/images/full/panel%204.jpg
I've attached an XLS file with sizes in millimetres of each panel, as well as a DXF file for one of the panels as an example. I can also supply these as CS5 AI files (but the forum won't let me attach a sample one).
For the lettering, enraved to a suitable depth for paint filling is fine, I can paint fill myself to keep the price down. I'm open to other options for lettering though.
Please PM if you can quote, I'm located on the Gold Coast.
Edit: Forgot to mention, in the DXF 1 unit = 1mm
Thanks!
Adam
Code:
Panel Qty Width Height Holes
Amp Booth 1 185 133 30
Control Room A 1 225 133 36
Control Room B 1 185 133 27
Control Room Rack 1 158 112 22
Control Room Desk 1 84 120 7
Door Bell 1 68 115 3
Hall 1 158 133 24
Light Dimmer 4 152 162 9
Live Room A 1 407 133 66
Live Room B 1 225 133 36
Live Room C 1 185 133 27
Live Room D 1 225 133 36
Lounge A 1 225 133 36
Lounge B 1 158 133 24
Microphone Outputs 1 485 267 188
Preamp Inputs 1 485 178 114
Subwoofer 1 115 68 5
Vocal Booth 1 262 133 42