Hello all :wave:

Although this is my first post, I've been lurking in the shadows for a while finding answers without needing to post... until now. I am using SURFCAM Velocity and posting to a HAAS VF2 with Mpost.

For 2-axis drill operations SURFCAM auto-completes the hole process 'cycle type' according to the selected tool. My issue is that several different cycle types end up using the G81 drilling cycle when it makes more sense for them to use G82 Spot Drill or G83 Peck Drill.

Centerdrill uses G81, and I would prefer G82.
Spotdrill uses G81, and I would prefer G82.
Counterbore uses G81, and I would prefer G82, or G83.

Can these be re-assigned either in SURFCAM or Mpost so that the preferred cycle type gets used instead of always using G81? OR is there a canned cycle name in Mpost for Centerdrill, Spotdrill, and/or Counterbore that would allow me to create canned cycle sections in my post for these specific operations?

Thank you for your help!
Matt