Anyone know where to find delrin sheets up to 1/2" thick? Having problems sourcing it. Thanks in advance!
Thread: Where to find delrin sheets
Results 1 to 6 of 6
-
10-06-2011, 02:27 AM #1
Registered
- Join Date
- Sep 2011
- Posts
- 0
Where to find delrin sheets
-
10-06-2011, 02:34 AM #2
Gold Member
- Join Date
- May 2004
- Posts
- 4519
Did you try McMaster-Carr? MSC? Grainger? Travers? Boedeker?
-
10-06-2011, 03:13 AM #3
Gold Member
- Join Date
- Jul 2005
- Posts
- 12177
I tried to find sheet Delrin years ago without success. Same with any shape except round bar.
An open mind is a virtue...so long as all the common sense has not leaked out.
-
10-06-2011, 03:19 AM #4
Gold Member
- Join Date
- May 2004
- Posts
- 4519
Here's one: DELRIN® Sheet and Delrin Rod- Order Online
-
10-06-2011, 01:18 PM #5
Registered
- Join Date
- Jun 2007
- Posts
- 143
If you don't need the Delrin brand name, use this search on ebay. Perhaps, you'll find a deal.
<(delrin,acetal) -(bar,rod,nut*) >
<http://www.ebay.com/sch/i.html?_nkw=%28delrin%2Cacetal%29+-%28bar%2Crod%2Cnut*%29+&_sacat=12576&_sop=1&_odkw= %28delrin%2Cacetal%29+-%28bar%2Crod%2Cnut*%29+black&_osacat=12576&_trksid =p3286.c0.m270.l1313>
-
10-06-2011, 02:07 PM #6
Registered
- Join Date
- Sep 2011
- Posts
- 0
Thanks to everyone. Found some!
Originally Posted by flyinchips
Reply With QuoteSimilar Threads
-
Process Sheets
By camtd in forum UG NXReplies: 1Last Post: 03-29-2011, 07:05 PM -
X3 SET UP SHEETS
By CNC_BOB in forum MastercamReplies: 2Last Post: 03-17-2010, 03:10 AM -
set up sheets
By 1234567 in forum BobCad-CamReplies: 4Last Post: 10-27-2009, 07:38 PM -
Tooling sheets
By Chris B Hofer in forum Canadian Club HouseReplies: 2Last Post: 12-22-2008, 04:15 PM -
Panel saw that will cut 4ft x 8ft sheets
By Router Lady in forum Want To Buy...Need help!Replies: 1Last Post: 09-18-2008, 05:09 AM
Posting Permissions
