[Larry83301]

Crap, that was plasma cut not please cut...thanks
Dawg

Would either of these help --- http://www.cnczone.com/forums/453064-post1968.html

Larry

[sqatch]

A tough draw see if this works for you. Also specify what you want to do such
as plasma/vinyl/carve/bore/punch/or chew.

[isaz]

sqatch,

Thank's a lot that will work fine. I am going to cut it out with plasma. I clean it up a bit.

Isaz

[Dawgonhawg]

Would either of these help --- http://www.cnczone.com/forums/453064-post1968.html

Larry

Larry, thank you but my friend is looking for more of a George Bulldog logo.
Thx, Dawg

[Switcher]

Hey everyone,

I am the admin of cncmentor.com and the reason for this post is that member eric5501 contact me via pm at let me know that he had downloaded virtually every file from this thread and wanted to upload them to the CAD file sharing portion of our site. My question for all of you and hopefully the admin of this site if he is reading, is this okay to do? How are these files licensed or are they? I DEFINITELY don't want to cause anyone offense by copying content without permission, however, I have had a hard time trying to figure out what the licensing is here? Any help on this from some of the more senior members?

Personally, I would prefer any files I've uploaded to cnczone to stay here on cnczone.

Link directly to the forum comment number that includes the vector file. Please don't hotlink files. Each comment on this forum has a unique URL in the upper right side of the comment for each vector file.

I'm sure everyone here would appreciate the credit for each individual vector file that they worked on, some of these files took a lot of work to create.

Thanks,

[Weldtutor]

Hey everyone,

I am the admin of cncmentor.com and the reason for this post is that member eric5501 contact me via pm at let me know that he had downloaded virtually every file from this thread and wanted to upload them to the CAD file sharing portion of our site. My question for all of you and hopefully the admin of this site if he is reading, is this okay to do? How are these files licensed or are they? I DEFINITELY don't want to cause anyone offense by copying content without permission, however, I have had a hard time trying to figure out what the licensing is here? Any help on this from some of the more senior members?

.
.
.
.
It seems fair that credit should be given to the original file creator/poster when uploaded to another site.
For the most part, the files are not licensed.

[Blackadder]

Just wondering if anyone out in cncworld would have a dxf of a grain harvester (or a combine as farmers call it) to share. I have tried to convert a few photos with no luck at all, which may be due to the quality of the images as well but I could'nt do it. Thanks:cheers:

Try this for size, may be a little too futuristic for your needs.

[Larry83301]

Hey everyone,

I am the admin of cncmentor.com and the reason for this post is that member eric5501 contact me via pm at let me know that he had downloaded virtually every file from this thread and wanted to upload them to the CAD file sharing portion of our site. My question for all of you and hopefully the admin of this site if he is reading, is this okay to do? How are these files licensed or are they? I DEFINITELY don't want to cause anyone offense by copying content without permission, however, I have had a hard time trying to figure out what the licensing is here? Any help on this from some of the more senior members?

If people on this site want to upload there files to your site they will. As for just taking the files and posting them yourself, that would be wrong. These files take hours to develop and tweak to get them to the point where the poster feels them ready to post.
Thank you for showing us another site where we may post our files and get a look at what others are doing. Those of us that want to may join your site and post things, but many may not want to join you. It will be up to the individual to join or not, and to post or not.

Larry

[Weldtutor]

Just wondering if anyone out in cncworld would have a dxf of a grain harvester (or a combine as farmers call it) Thanks:cheers:

The attached might harvest your grain.

[ahmednos]

COULD ANYONE PLEASE PUT A MIRROR FRAMES AS MOUCH AS YOU HAVE

THX
:cheers::cheers::cheers:

[lucik321]

thank you but my friend is looking for more of a George Bulldog logo.

[zeed]

Here is a quick trace of Georgia Bulldogs logo.Needs some cleanup...

[ahmednos]

COULD ANYONE PLEASE PUT A MIRROR FRAMES AS MOUCH AS YOU HAVE

THX

No one

[Fatboy]

No one

I (and I'm sure others here) don't really understand what you are asking for...

[ahmednos]

hi
i want MIRROR FRAMES dxf's

[Blackadder]

hi
i want MIRROR FRAMES dxf's

Like this one?

[ahmednos]

Like this one?

yes please
:banana::banana::banana:
thank you bro
if you have more please post
and if any body else have some please share them

thank you all
(group)

[Blackadder]

yes please
:banana::banana::banana:
thank you bro
if you have more please post
and if any body else have some please share them

thank you all
(group)

Five in here but includes the one already posted, have some more which will be posted later (have to walk the dog).

[ahmednos]

Five in here but includes the one already posted, have some more which will be posted later (have to walk the dog).

ok thank you

im waiting for the rest later

thanks again

[Blackadder]

ok thank you

im waiting for the rest later

thanks again

'Frame2' has another 9 frames in DXF, with 'Frame3' having a further 11 frames for you. I think that is all I have.

Make sure you show us the completed work with these files.