Finally finished the top plate. Also had room for 1 row of spacers. The second set of spacers will be 1" thick, as I need an extra 1/4" for the E chain I'll be using. I drilled holes in the plate and spacer to glue them down, but I might just put pins in the holes for alignment and just glue and staple it all together.
Need to order a 4mm tap tonight for the linear rail bolts, as I want to tap the holes before I assemble everything. I'm hoping to get all the holes drilled and tapped this weekend.
Thread: Z²
Results 1 to 20 of 266
Hybrid View
-
11-02-2011, 02:42 AM #1
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With Quote
