587,981 active members*
3,864 visitors online*
Register for free
Login

Thread: Flat stock guide

Results 1 to 5 of 5
  1. 11-06-2011, 05:53 PM #1
    bg_blea
    bg_blea is offline Registered
    Join Date
    Nov 2011
    Posts
    0

    Flat stock guide

    Description: The guide is used to feed 1/2" x 1" flat stock.
    Material: steel.

    I can provide step file if you need it.

    Edit:
    - Please ignore the 5.0018" it should be 5".
    - Tolerance for the guide are only important for the slot openings.: 1/2" +- 0.009" and 1" +- 0.012" for width. This are also the tolerances for the stock material.
    - I will take care of the tight fit
    Attached Thumbnails Attached Thumbnails guide.jpg  
  2. 11-06-2011, 07:54 PM #2
    abcmojave
    abcmojave is offline Registered
    Join Date
    Aug 2010
    Posts
    128

    questions

    Is the .75 hole centered? You want these blocks joined somehow?
  3. 11-06-2011, 08:13 PM #3
    bg_blea
    bg_blea is offline Registered
    Join Date
    Nov 2011
    Posts
    0

    details

    Doesn't matter how they are joined.
    The .75" hole should be centered as best as possible relative to the stock.
  4. 11-09-2011, 03:03 PM #4
    cafe69
    cafe69 is offline Registered
    Join Date
    Sep 2011
    Posts
    0

    Flat stock guide

    PM Sent

    Thanks
  5. 11-12-2011, 01:51 AM #5
    bg_blea
    bg_blea is offline Registered
    Join Date
    Nov 2011
    Posts
    0

    Got what I wanted

    Thank you guys for your time.
« Previous Thread | Next Thread »

Similar Threads

  1. Flat stock aluminum cut-outs
    By dakotapod in forum Employment Opportunity
    Replies: 2
    Last Post: 09-07-2010, 03:49 PM
  2. engraving flat stock 304 stainless
    By cncmstr in forum MetalWork Discussion
    Replies: 0
    Last Post: 08-12-2009, 08:09 AM
  3. Linear guide rails..flat vs round
    By cloudbase in forum DIY CNC Router Table Machines
    Replies: 4
    Last Post: 10-09-2008, 02:11 PM
  4. Holding Flat Stock on a mill
    By John Lorbiecki in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 3
    Last Post: 08-30-2007, 02:00 PM
  5. Holes in stainless flat stock
    By OCNC in forum MetalWork Discussion
    Replies: 6
    Last Post: 06-02-2005, 06:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules