What happened to the Brissy group?
Is it still active or has it died the lack-of-bureaucratic-support death ?
What happened to the Brissy group?
Is it still active or has it died the lack-of-bureaucratic-support death ?
Damnit...!! I'm from bris and need some advice for a firstime build...
Come on brisvegas...!
Anyone know of any local brissy surppliers of linear motion parts..?
Hi
Brisbane has been very quiet.
I have seen this link posted a few times. They might be able to help.
linearbearings
Regards
Verm
Hello Eddy,
feel free to message me with your questions
Zig
Most probably too busy working ;-)
Sorry, gotta run
Hardly anyone wanted to help organise/contribute material/host/ etc.
I even did a website for the group that fell through because no-one bothered to contribute.
:violin:
Machinists do it with greater precision and less tolerance!
Hi Zig & Ash,
Yep the group died off and I got caught up dealing with personal and business issues which took priority at the time.
People seem to be still floating around so maybe there is hope that a gathering will happen again soon.
Lots of great people and heaps of experience and knowledge which should be shared.
Cheers,
Claudio
- WidgitMaster Wide Router with Kress FME 800, HobbyCNC 305oz Stepper Kit
- WidgitMaster Midi Router with Dremel
Hi all
I was wondering myself what had happened. I was just getting the cnc bug when all went quiet.
I was going to offer my services to host an event, as I have a small workshop that we could set up a few machines in to show and tell.
There is even a small brewery next door to organise refreshments!
Anyway if it ever gets going again the offer is open.
many brains can achive great things!!
Justin
Justin,
Organise a meeting and I can make sure it goes out to all the guys that previously attended.
I still keep in contact with some of the guys and most would be keen on getting something going, catch is none of us seem to have the time to organise.
Your thoughts?
Ash
Machinists do it with greater precision and less tolerance!
Hi Ash
Ok sounds good, now what is the usuall program, What do I need to sort out.
Do people bring there machines, if so what power do I need to sort out, how many single phase and three phase outlets do i need?
Do you usually have a pizza or bbq for snacks?
or is it just a matter of turning up and having a yarn??
I have a couple of 8' x4' benchs to put stuff on, will that be enough
anything else i should know??
thanks Justin
It's a matter of getting everyone to talk about their projects and place items for discussion.
You can do as much or as little as you like, I'm sure the guys would be fine with pizza for lunch, and maybe you can ask for a small donation to cover drinks and biccies etc.
I wouldn't think anyone would bring a machine. Do you have one that we can play with?
Other than that it's a matter of getting the guys to put stuff up for discussion and an item to talk about of interest to the group.
Hope this helps
Ash
Machinists do it with greater precision and less tolerance!
Hi Ash
Ok that gives me a better idea,
Looks like I might have a chap from EVA Robotics | The latest in Stepper Motor Control who is prepared
to come down with some of his goodies and show them off.
I guess now we have to sort a date and how many prospective people will come along.
I think it would have to be next Sat morning for a get together, my workshop will be too cluttered after that with all the stuff for xmas in there.
I hopefully will have the plasma cutter back up and running, and am prepared to cut any small jobs for people if the want.But I only cut ali and stainless.
Just bring a DXF and material (if you have some)we will see what we can do.
There is no air conditioning in the place and only a couple of chairs, so if you would like to sit down, please bring you camping chair.
Pizza can be ordered from down the road, I can put some soft drinks in the fridge, and a few beers.
Now I will just need a show of hands to see if it is a go or not.
So all who are coming say "I"
If I didn't have my current part time drafting job, I'd be there.
Unfortunately a tight timeline prevents just about any free time.
Next time gents.
Count me in on this one! Just need to know when & where and I'll be there.
I just sent an email to Borys, who should have the email lists of the guys that came to the last ones.
Thanks for taking the initiative to host a meeting.
I will be there and I can talk a bit about my current project (some vacuum forming)
Ash
Machinists do it with greater precision and less tolerance!
It turns out that Borys has somehow deleted all his 2009 emails.
Best thing to do would be to go back through the old threads and PM the details to all the guys that posted in the threads.
I'll dig some up.
http://www.cnczone.com/forums/cnczon...ser_group.html
http://www.cnczone.com/forums/austra...ser_group.html
http://www.cnczone.com/forums/austra...ser_group.html
http://www.cnczone.com/forums/austra...ser_group.html
that should keep ya busy
Machinists do it with greater precision and less tolerance!
Hello all
Can anyone advise if this event is happening today. I'm interested in attending.
Cheers
GPD
Hi All
I decided to postpone the meeting as there didnt seem to be alot of interest.
Perhaps it is a bit to close to xmas.
I will try again in the new year.
Anyone here with Mastercam experience who wants some part time / weekend work PM me please. Make sure you leave a contact number too.
Hi all,
There is a get together at my place at Algester on Saturday 12Feb12.
PM me and I will give you the address.
Regards
Chrisjh