Sebastian,
Does anyone have blueprints of a Chevy bell housing or dowel pin location? - THE H.A.M.B.
you will not find the power book one here, but the chevy pattern is on this page.
Results 1 to 20 of 82
Hybrid View
-
01-31-2012, 05:14 PM #1
Registered
- Join Date
- Aug 2005
- Posts
- 10
-
01-28-2014, 05:43 PM #2
Registered
- Join Date
- Jan 2014
- Posts
- 1
For the record the Dodge 3.7,4.7,5.7 have the same block to trans bolt pattern as the LA engines with the exception of the top center hole missing on the newer engines. They also have a small sheet metal spacer inbetween the block and the trans that may need to be accounted for.
Reply With QuoteSimilar Threads
-
Popular presents.......
By MarkusD in forum Portfolio BoardReplies: 4Last Post: 02-13-2014, 01:29 PM -
What will I make Is the popular question...
By milhead in forum CNC Wood Router Project LogReplies: 46Last Post: 02-08-2012, 12:40 AM -
Big Block Chev Bellhousing Dimensions
By hellcycledoctor in forum Australia, New Zealand Club HouseReplies: 3Last Post: 03-30-2010, 11:27 PM -
drawing board drawings to cad drawings
By mike hide in forum Uncategorised CAM DiscussionReplies: 5Last Post: 03-23-2009, 10:35 AM -
single cylinder engine drawings?
By savvypower in forum MetalWork DiscussionReplies: 4Last Post: 02-01-2007, 12:44 PM
Tags for this Thread
Posting Permissions
