What are the differences between the VMC's (1000, 800, 760) and Torq-Cut machines (TC22 & TC30)? It seems like they overlapped in time frame but I couldn't find much searching on here. I'm guessing the VMC's were more rigid.
Does anyone know the years each was made?
Results 1 to 2 of 2
-
02-23-2012, 06:50 AM #1
Registered
- Join Date
- Aug 2010
- Posts
- 48
Bridgeport VMC and Torq-Cut machines
-
02-24-2012, 02:41 PM #2
Moderator
- Join Date
- Nov 2004
- Posts
- 3028
VMC had Siemens AC drives and never a geared head. TC-22 and 30 had DC brush type axis motors, a Yaskawa spindle drive, and usually (but not always) a geared head.
Both had the DX32 computer based control. VMC were bigger.
George(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With QuoteSimilar Threads
-
Bridgeport Torq-Cut TC 3G??
By Kristjan in forum Bridgeport / Hardinge MillsReplies: 17Last Post: 11-02-2017, 11:47 AM -
Info on Bridgeport Torq Cut 22 w/ DX 32 or other small machines??
By vettespeed in forum Knee Vertical MillsReplies: 17Last Post: 10-04-2010, 11:19 PM -
Bridgeport Torq Cut 30
By charliemisa in forum Bridgeport / Hardinge MillsReplies: 3Last Post: 04-23-2010, 12:11 PM -
Torq-Cut 22 Shutdown! Please check this if you know these machines
By RedGTZ in forum Bridgeport / Hardinge MillsReplies: 3Last Post: 02-20-2008, 02:22 PM -
Bridgeport Torq-Cut 2G-?????
By bherr in forum Bridgeport / Hardinge MillsReplies: 17Last Post: 10-21-2006, 06:56 AM
Posting Permissions
