603,967 active members*

2,557 visitors online*

Register for free

Login

IndustryArena Forum > CNC Electronics > Rutex Products > Servo Drives > Surplus motors

Thread: Surplus motors

Results 1 to 20 of 293

Thread Tools
Search Thread
- Advanced Search
Display
- Switch to Linear Mode
- Switch to Hybrid Mode
- Threaded Mode

Threaded View

rutexus Gentlemen, I got the 500... 10-12-2005, 12:57 AM

Inventthis That's really good news Tom.... 10-12-2005, 03:48 AM

miljnor Time for a shopping spree! :D... 10-12-2005, 04:20 AM

damae Thank you! 10-12-2005, 08:24 AM

ger21 Much to my wife's... 10-12-2005, 12:52 PM

eman5oh I am thinking of getting some... 10-12-2005, 08:13 PM

HillBilly 2000cpr. Darek 10-12-2005, 10:47 PM

pcroxford where did you buy the motors? 10-13-2005, 01:21 AM

Inventthis motors at... 10-13-2005, 02:51 AM

dpaulson I have a few coming too. You... 10-13-2005, 03:05 AM

walter $40 per motor? What`s wrong... 10-14-2005, 03:37 AM

ger21 You need $200 drives to run... 10-14-2005, 03:40 AM

miljnor considering the motors new... 10-14-2005, 04:35 AM

walter :cheers: I`m in... Thanks... 10-14-2005, 05:01 AM

rsecret No sure I Am looking at the... 10-14-2005, 06:48 AM

rsecret Ok, I searched and found the... 10-14-2005, 07:15 AM

More replies below current depth...

asuratman Hi, I am new here. I also... 10-14-2005, 08:42 AM

damae This motor is rated... 10-14-2005, 09:01 AM

rutexus At the Burdon Surplus Center... 10-14-2005, 01:36 PM

napalm03 What size of these servos... 10-14-2005, 03:40 PM

miljnor you know what they say??? ... 10-14-2005, 04:34 PM

ger21 Especially when the price is... 10-14-2005, 04:45 PM

napalm03 True enough :) I ordered... 10-14-2005, 04:47 PM

ger21 It'll work with both, as long... 10-14-2005, 05:01 PM

Switcher Motor Dimensions ...:banana: 10-14-2005, 06:27 PM

LHejza I'm a bit concerned that the... 10-14-2005, 09:13 PM

ger21 The R2030 20A rating is... 10-15-2005, 12:37 AM

Al_The_Man Can someone show the link... 10-14-2005, 11:16 PM

Inventthis For Rutexus: Tom, Were you... 10-15-2005, 12:11 AM

txcowdog I have 220v 3 phase in my... 10-15-2005, 12:23 AM

ger21 You supply the drives up to... 10-15-2005, 12:32 AM

JFettig Here is something I found, it... 10-15-2005, 12:27 AM

miljnor http://www.surpluscenter.com/i... 10-15-2005, 12:28 AM

JFettig -my drawings were incorrect... 10-15-2005, 02:48 AM

Al_The_Man Did anyone definitively... 10-15-2005, 03:20 AM

rutexus Pole count 10-16-2005, 11:35 PM

rutexus Gentlemen, I plan to put... 10-16-2005, 11:41 PM

h_2_o retexus: if you need those... 10-17-2005, 01:37 AM

napalm03 is there a part # for those... 10-17-2005, 01:58 AM

rutexus I am always interested in new... 10-17-2005, 03:17 AM

h_2_o i dont own the shop and they... 10-17-2005, 03:26 AM

ger21 Tom, do all the different... 10-17-2005, 03:28 AM

rutexus Thanks, H20 for the resistor... 10-17-2005, 03:40 PM

WilliamD Where are the "drives" or... 10-17-2005, 07:09 PM

JFettig I got one of my motors here... 10-17-2005, 07:16 PM

Al_The_Man I don't have a motor but the... 10-17-2005, 07:41 PM

ger21 The brake is on until 24V is... 10-17-2005, 07:27 PM

JFettig Yes, I belive the brake is... 10-17-2005, 07:48 PM

Al_The_Man Actually its the reverse,... 10-17-2005, 07:54 PM

pcroxford Are ther open-source servo... 10-18-2005, 12:46 AM

JFettig I found the wires running 72... 10-18-2005, 12:48 AM

walter Two yellow wires are for the... 11-01-2005, 05:22 AM

JFettig here is a spec sheet miljnor... 10-18-2005, 05:24 AM

miljnor no hidding it was in the... 10-18-2005, 05:32 AM

h_2_o does anyone know does this... 10-18-2005, 09:22 AM

damae When used with a Rutex... 10-18-2005, 10:05 AM

miljnor Even if they release the... 10-18-2005, 04:18 PM

turmite Tom as soon as you get some... 10-18-2005, 10:54 PM

h_2_o miljnor: well what i had in... 10-19-2005, 06:50 AM

rutexus The brake is on until you... 10-19-2005, 02:19 PM

miljnor H2o thats a cool little... 10-19-2005, 04:35 PM

Inventthis Tom How do you disable the... 10-19-2005, 05:31 PM

Al_The_Man You are probabally better off... 10-19-2005, 05:51 PM

wallygator99 AC power supply for surplus... 10-19-2005, 11:49 PM

ger21 You don't need AC, you use a... 10-20-2005, 12:11 AM

FastEddie Thanks to everyone for all... 10-20-2005, 01:52 AM

wallygator99 O.K. now 30 left 10-20-2005, 02:15 AM

PEU Can the encoders be used for... 10-20-2005, 02:45 AM

JFettig The motors are worthless... 10-20-2005, 02:53 AM

PEU I hate when this happens, the... 10-20-2005, 03:10 AM

JFettig for a router, the 300w motors... 10-20-2005, 03:21 AM

damae Down to 20! 10-20-2005, 03:34 AM

xyzcnc 1000 watt'rs all gone! 10-20-2005, 05:25 AM

DerekZahn Well looks like the great... 10-20-2005, 03:49 PM

Evodyne Yup, me too. Don't know why,... 10-20-2005, 06:41 PM

More replies below current depth...

rutexus Gentlemen, I'm away until... 10-20-2005, 08:21 PM

JFettig ^^^^^ away till monday,... 10-23-2005, 02:43 AM

m_j01 Rutex R2030/1000W Sanyo motor... 10-20-2005, 09:51 PM

Evodyne Gee, I wonder if... 10-21-2005, 12:53 AM

ger21 Would these work?... 10-21-2005, 03:35 AM

damae Sure looks promising. $275... 10-21-2005, 06:31 AM

HillBilly To the best of my memory the... 10-21-2005, 12:51 PM

JFettig that and they put out 200v. 10-21-2005, 03:00 PM

ger21 200V is the input. Not sure... 10-21-2005, 04:47 PM

Xerxes I'm currently developing a... 10-22-2005, 12:21 PM

DerekZahn Cool! If I fail to get mine... 10-22-2005, 03:40 PM

rpm mill This is not a endorsement of... 10-23-2005, 12:09 AM

Evodyne I guess the question anyone... 10-23-2005, 12:17 AM

DerekZahn Here's a page for a model... 10-23-2005, 12:54 AM

rpm mill Amps, Control, motors, please... 10-23-2005, 03:19 AM

walter 12A continuous/ 20A peak.... 10-25-2005, 12:56 AM

rpm mill You are correct. 10-25-2005, 01:50 AM

walter Beside the issue of step and... 10-25-2005, 03:19 AM

damae Where's Rutexus? It seems... 10-23-2005, 02:21 AM

miljnor I believe the rutex drives... 10-23-2005, 03:19 AM

damae Oops. You're right, he did... 10-23-2005, 06:01 AM

ger21 They DO have the potential to... 10-23-2005, 06:25 AM

walter Would these work ? --> ... 10-23-2005, 03:48 PM

DerekZahn That SimpleServo device looks... 10-23-2005, 04:17 PM

andy55 170 VDC for the servo drives... 10-23-2005, 04:26 PM

Al_The_Man Most of these are isolated... 10-23-2005, 04:36 PM

Xerxes I have looked at 100W P5... 10-23-2005, 07:10 PM

m_j01 Sanyo Motor Drive Method 10-23-2005, 11:39 PM

rpm mill encoder output I think 10-24-2005, 02:33 AM

eat there is some pdfs here... 10-24-2005, 03:40 AM

miljnor I personaly don't think they... 10-24-2005, 05:14 PM

miljnor This is support data from... 10-24-2005, 05:21 PM

DerekZahn As for the encoder being... 10-24-2005, 05:27 PM

Al_The_Man There are two methods used... 10-25-2005, 12:07 AM

vmax549 Have you looked at the LS182... 10-25-2005, 04:26 PM

DerekZahn The 8/12 amp one looks like... 10-25-2005, 04:33 PM

Xerxes I measured the waveform of... 10-25-2005, 05:19 PM

miljnor correct me if I am wrong but... 10-25-2005, 06:27 PM

Xerxes Trapezoidal motor is... 10-25-2005, 06:53 PM

rpm mill Logosol would be a poor choice 10-25-2005, 10:42 PM

DerekZahn The 400w motors and the... 10-25-2005, 10:44 PM

jnhg A sinusoidal motor with a... 10-27-2005, 12:48 PM

miljnor Sorry Xerxes I surf the net... 10-26-2005, 01:23 AM

rutexus Gentlemen, I have just... 10-26-2005, 05:32 AM

damae Tom, thank you for the... 10-26-2005, 07:32 AM

DerekZahn Tom, a question about the... 10-26-2005, 03:19 PM

rutexus Gentlemen: With all the... 10-26-2005, 05:19 PM

tooltrooper Can anyone tell me what I... 10-26-2005, 05:57 PM

ger21 Use Mach3's slaving function,... 10-26-2005, 07:38 PM

tooltrooper Thanks Gerry. I found the... 10-26-2005, 08:06 PM

Xerxes Tom, do these drives have... 10-26-2005, 07:24 PM

jnhg One more thing, just to... 10-27-2005, 01:34 PM

HillBilly Tom, what DC bus voltage are... 10-27-2005, 02:02 PM

contactirfu Hi all This is Irfan From... 10-28-2005, 12:38 PM

h_2_o ok, i'm gonna take this in a... 10-29-2005, 05:13 AM

Al_The_Man The VFD does not provide... 10-29-2005, 04:32 PM

Xerxes Hi! There has been some... 10-29-2005, 12:19 PM

DerekZahn Good job Xerxes! I'm... 10-29-2005, 04:02 PM

Xerxes Some people say that VFD can... 10-29-2005, 05:13 PM

h_2_o too bad those 400's would... 10-29-2005, 06:59 PM

ger21 Mach3 has a step and... 10-29-2005, 07:38 PM

Stevie but would this not take... 10-30-2005, 07:59 PM

Stevie Just a note to everybody;... 10-30-2005, 08:02 PM

walter These look familiar ---> ... 10-30-2005, 10:50 PM

Stevie yeah for like 10 times the... 10-30-2005, 11:18 PM

JFettig not if you use a G-Rex;) I... 10-30-2005, 09:27 PM

Stevie but where do you get this... 10-30-2005, 09:31 PM

ger21 Mach3 supposedly will do 6... 10-31-2005, 03:48 AM

Stevie thanks Gerry 10-31-2005, 04:00 AM

rpm mill G-Rex is a FPGA engine (Field... 10-31-2005, 04:28 AM

ger21 I said the easiest way :) 10-31-2005, 04:40 AM

miljnor i haven't used it as such but... 10-30-2005, 02:42 AM

JFettig geckodrive has the g-rex, not... 10-30-2005, 11:50 PM

Xerxes Hi! I posted a thread for... 11-02-2005, 07:35 PM

chas Does anyone know the diameter... 11-05-2005, 04:43 AM

DerekZahn 16mm. 11-05-2005, 04:54 AM

rutexus Gentlemen, The 1000 watt... 11-06-2005, 02:24 PM

ger21 Tom, did you ever run some... 11-06-2005, 02:32 PM

Stevie Real shame Tom Better luck... 11-06-2005, 03:21 PM

rutexus Gentlemen, I did run more... 11-06-2005, 03:31 PM

chas Tom are you using the R992H... 11-08-2005, 01:42 AM

Stevie he's been using the 992;... 11-08-2005, 04:02 AM

chas reading right now!! 11-08-2005, 05:12 AM

rutexus Gentlemen, I sent a 1000... 11-09-2005, 04:07 PM

tooltrooper Tom, I'll be glad to donate... 11-09-2005, 05:50 PM

CNCAddict The Gentleman who started the... 11-10-2005, 04:31 AM

machine_51 I have three of these motors,... 11-10-2005, 05:06 AM

HillBilly Make sure none of the motor... 11-10-2005, 11:20 AM

machine51 That was it. Thanks much. 11-10-2005, 02:14 PM

m_j01 One 1kW motor left... 11-21-2005, 04:59 PM

GAWnCA Thanks M J for that info. 11-21-2005, 05:05 PM

vmax549 All I can say is wow. I... 12-02-2005, 03:38 AM

JFettig Awesome, do you have any... 12-02-2005, 03:45 AM

gimble88 Vmax, Are you using the... 12-02-2005, 03:47 AM

rutexus Gentlemen, I'm still... 12-05-2005, 05:13 PM

Stevie Just got my 3 P5's today; wow... 12-11-2005, 12:35 AM

H500 Steve, Can you tell me how... 12-13-2005, 03:09 AM

Stevie I didn't I had them shipped... 12-13-2005, 03:29 AM

andy55 What DC bus voltage have you... 01-03-2006, 10:06 PM

rpm mill Possibly the Sanyo engineers... 01-04-2006, 04:31 AM

Stevie I agree; I'd be happy with... 01-04-2006, 04:35 AM

andy55 My aim is to meet the... 01-04-2006, 10:45 AM

ger21 Tom, any word from Vlad? What... 01-04-2006, 05:04 AM

rutexus Gentlemen, At 3:00 AM I... 01-04-2006, 03:37 PM

rutexus Gentlemen, As far as the... 01-04-2006, 03:48 PM

vmax549 Tom , Have you gotten a test... 01-04-2006, 04:06 PM

rutexus Gentlemen, Vladimir tested... 01-05-2006, 12:55 PM

max_imum2000 any one ? 01-08-2006, 04:30 PM

KTP There isn't extreme cogging... 01-09-2006, 07:24 PM

rutexus Gentlemen, In reference to... 01-10-2006, 03:49 PM

KTP I was just referencing Al's... 01-10-2006, 06:47 PM

andy55 There was a website that had... 01-08-2006, 07:15 PM

ger21 Surplus Center still has 100W... 01-08-2006, 07:19 PM

max_imum2000 come on 100watts ! , this... 01-08-2006, 11:55 PM

Xerxes I would like to have couple... 01-09-2006, 08:15 PM

KTP Where are you located Xerxes?... 01-09-2006, 08:18 PM

Xerxes KTP, I live in the Finland... 01-10-2006, 12:15 AM

miljnor This is from Rutex at post... 01-10-2006, 10:25 PM

KTP So from this I gather the... 01-11-2006, 01:06 AM

unterhaus Just saw three of the 1k... 01-11-2006, 07:56 AM

rutexus KTP, I do not know all the... 01-11-2006, 10:12 PM

KTP Ok, thanks Tom. I appreciate... 01-11-2006, 10:57 PM

johan_tr2000 The Sanyo Denki Servo motor... 01-16-2006, 02:00 AM

bdillard Can anyone post a link to... 01-17-2006, 02:45 AM

ger21 They're all sold out. 01-17-2006, 03:50 AM

tintruder Pardon the inquiry in case I... 01-26-2006, 05:45 AM

Ken_Shea Tom, You did not look well... 01-26-2006, 05:55 AM

tintruder Ken, What is the website... 01-26-2006, 05:58 AM

Ken_Shea The menues are on the left... 01-26-2006, 06:04 AM

tintruder My apologies.... I had to... 01-26-2006, 06:26 AM

Syp most probably it had security... 01-26-2006, 07:27 AM

rutexus Gentlemen, I finally have... 01-27-2006, 09:30 PM

Syp Would it be possible for you... 01-27-2006, 10:25 PM

Stevie If Vlad says they work it... 01-28-2006, 01:49 AM

Ken_Shea Stevie, I think Tom will... 01-28-2006, 03:30 AM

KTP P5 1KW motors - are the... 02-02-2006, 05:19 AM

Syp If the Sanyo motors work so... 01-28-2006, 03:38 AM

Xerxes Syp, sinusoidal drive should... 01-28-2006, 03:02 PM

max_imum2000 way to go !!, please go ahead... 01-28-2006, 04:35 PM

Syp Xerxes, I did not mean to... 01-28-2006, 07:47 PM

Al_The_Man How smooth is the 24vdc? If... 02-02-2006, 06:09 AM

KTP 24V with maybe 20mV ripple... 02-02-2006, 06:31 AM

KTP I should clarify that I did... 02-02-2006, 06:41 AM

andy55 this brake noise is the same... 02-02-2006, 01:58 PM

JFettig What drives are you using... 02-02-2006, 03:33 PM

KTP Hi Jon, I am using a... 02-02-2006, 11:24 PM

JFettig KTP, Do you have any posts... 02-02-2006, 11:58 PM

KTP Jon, I have not really posted... 02-03-2006, 12:25 AM

KTP Hi, I made the video of... 02-05-2006, 10:08 AM

johan_tr2000 Hi KTP, It is a nice move... 02-09-2006, 02:28 AM

thatcadguy Sanyo Denki P5 Servo Motors 02-26-2006, 08:25 PM

rutexus Rutex Servo products,... 02-09-2006, 03:42 AM

More replies below current depth...

Xerxes Tom&Vladimir, any chances of... 02-09-2006, 10:06 PM

rutexus Gentlemen, I believe... 02-20-2006, 03:40 PM

miljnor http://www.cnczone.com/forums/... 02-20-2006, 05:35 PM

unterhaus www.a-m-c.com has an... 02-20-2006, 07:52 PM

machine_51 Has anyone else gotten their... 05-11-2006, 03:10 AM

JFettig KTP has his working. I have... 05-11-2006, 03:15 AM

machine_51 Are you using the 2030 drive... 05-11-2006, 03:21 AM

rutexus Sanyo Denke motors 05-11-2006, 03:26 PM

JFettig AMC drive, its a trapazoidal... 05-11-2006, 03:24 AM

machine_51 Did or are you building you... 05-11-2006, 03:30 AM

JFettig I havent ironed out all the... 05-11-2006, 03:36 AM

ger21 I plan on buying Rutex, but... 05-11-2006, 03:33 PM

sdantonio I have not head a chance to... 05-11-2006, 04:43 PM

JFettig SPI is whats not supported,... 05-11-2006, 04:45 PM

zoeper Hi Seems like i'm late again.... 06-25-2006, 12:31 AM

m_j01 1kW motors on Ebay... 06-25-2006, 12:56 AM

Evodyne I've got three of the 1KW... 06-28-2006, 01:46 AM

zoeper Thanx MJ I have them on my... 06-25-2006, 06:15 PM

Grifftek P5 Motors Does anyone have... 06-27-2006, 07:48 PM

DANNY SEBASTIAN i need some help with putting... 06-28-2006, 04:02 AM

andy55 Hi All, I have had a hard... 12-11-2006, 08:02 PM

andy55 My three 400W servos are now... 12-12-2006, 02:55 PM

FPV_GTp hi sorry to bring this... 02-22-2007, 03:35 AM

rutexus Gentlemen, I do not know... 02-23-2007, 05:23 AM

JFettig heres a variety pack:... 02-23-2007, 05:26 AM

aksiuchenka Does anyone has these motors... 11-16-2007, 08:43 PM

waughd Hi I have 6 x 1KW units that... 11-18-2007, 01:16 AM

miljnor I have a variety of these... 11-19-2007, 03:05 AM

contactirfu Kindly PM me with wattage,... 11-19-2007, 03:10 AM

miljnor I will try to get back to you... 11-20-2007, 03:52 AM

sakarya83 3 ph ac servo motor 11-13-2008, 09:54 AM

miljnor I know this is an old and... 09-07-2009, 01:43 AM

gimble88 Got an item number? I looked... 09-07-2009, 02:42 AM

srbliss P5 Motprs 10-01-2009, 04:30 PM

miljnor http://cgi.ebay.com/ws/eBayISA... 09-07-2009, 06:00 AM

budP No Returns Accepted why... 09-15-2009, 05:21 AM

miljnor Obviously not an Ebay... 09-15-2009, 04:35 PM

Larken I have a customer right now... 09-19-2009, 05:28 PM

Al_The_Man I have had the same, a few... 09-19-2009, 05:48 PM

Al_The_Man I am just sorry I sat on the... 10-01-2009, 11:56 PM

srbliss P5 motors 10-02-2009, 12:26 AM

Grifftek p5 motors 10-02-2009, 02:28 AM

srbliss Hello Bill Yes these are the... 10-02-2009, 03:30 AM

ger21 You can use a Galil or one of... 10-02-2009, 01:50 PM

srbliss This will also work with... 10-02-2009, 05:47 PM

Previous Post

Next Post

10-14-2005, 08:42 AM #10
asuratman

View Profile

View Forum Posts

Member
Join Date

Sep 2005

Posts

1198
Hi,
I am new here. I also plan to buy that surplus motor 400 watt Denki P5 after reading that rutex driver will work with this kind of motor. Is this size of motor good enough to retrofit knee mill to CNC, if anyone of you have experience with this size of motor, let me know.

Reply With Quote

Quick Navigation Servo Drives Top

« Previous Thread | Next Thread »

Posting Permissions

You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
[VIDEO] code is On
HTML code is Off

All times are GMT +1. The time now is 11:11 AM.

Powered by vBulletin® Version 4.2.5
Copyright © 2025 vBulletin Solutions Inc. All rights reserved.