i need a small part milled. it should be pretty easy for those of you with the appropriate machinery.
i have attached a drawing of it. its basically a 1" diamter aluminum rod (6061 preferably) thats 0.25" thick overall. it has two spots milled out of it. let me know if you have any questions. this is just a preliminary drawing and will probably change, im just looking for an idea of what it would cost.
edit:
i should add that i only need 2 of these done, 4 if the price doesnt change a whole lot. but a small quantity nonetheless.
Results 1 to 13 of 13
-
10-21-2005, 02:29 AM #1
Registered
- Join Date
- Oct 2004
- Posts
- 298
RFQ: small 2D milling needed, pretty simple
-
10-21-2005, 02:55 AM #2
Registered
- Join Date
- Dec 2003
- Posts
- 768
Pm'ed
Proud owner of a Series II Bridgeport.
-
10-21-2005, 03:25 AM #3
Registered
- Join Date
- Apr 2003
- Posts
- 5
I could make those aluminum parts for you for $10.00 each.
Brant Emery
630-968-6001
[email protected]
-
10-21-2005, 03:47 AM #4
Registered
- Join Date
- Oct 2004
- Posts
- 298
i think i found someone to do the part for me. ill let you guys know if i need anymore help. thanks for now!
-
10-22-2005, 01:28 PM #5
Registered
- Join Date
- Oct 2005
- Posts
- 9
10.00 each for 2 parts. Pretty cheap I must say.
-
10-23-2005, 12:48 AM #6
Registered
- Join Date
- Oct 2005
- Posts
- 118
How many ppl usualy watch this ?
-
10-23-2005, 12:49 AM #7
Registered
- Join Date
- Oct 2005
- Posts
- 118
I didn't realize that I have been reduced to a lowly "Chipsweeper"
-
10-23-2005, 01:05 AM #8
Registered
- Join Date
- Apr 2003
- Posts
- 1873
How many ppl usualy watch this ?
If you are referring to the RFQ posts, as far as I know everyone that enjoys working for nothing watches it
Chip Sweeper, yep, gotta start somewhere, donate some money and you'll get a raise
Ken
-
10-23-2005, 02:06 AM #9
Registered
- Join Date
- Oct 2005
- Posts
- 118
Hey there
I was wondering if anybody talked much here. I am in the process of a new start-up and decided to get a lil' info from the masses.
-
10-23-2005, 09:23 AM #10
Registered
- Join Date
- Apr 2003
- Posts
- 1079
Sorry guys, can we keep this on topic please. Not really fair to cowanrg to crash his RFQ
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
10-23-2005, 04:04 PM #11
Registered
- Join Date
- Oct 2005
- Posts
- 118
sorry
-
10-23-2005, 05:31 PM #12
Registered
- Join Date
- Oct 2004
- Posts
- 298
honestly, im good. i got my quote, i dont need this thread anymore.
for everyone's info, i got a lot of responses, many very quick (within 1 hour of posting). prices ranged from VERY high to very low.
-
10-23-2005, 06:16 PM #13
Registered
- Join Date
- Apr 2003
- Posts
- 1079
Right then guys, since everyone is happy, mind the doors please
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Posting Permissions
