I was wondering if anyone could help me gather the parts I need to make a balancer circuit for the turbines I build. I have the print where everything goes but I need to know what all the resisters and capacitor values mean to buy the right parts. This circuit is from the U.K. I'm in the U.S. and don't really want to have stuff shipped from the U.K. when I know I can get them probably from my local Radio Shack. If anyone is interested I'll post the schematic. Thanks!
Greg
Results 1 to 2 of 2
-
10-23-2005, 08:47 PM #1
Registered
- Join Date
- Jan 2004
- Posts
- 85
Help with a circuit board project
-
10-23-2005, 09:22 PM #2
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24220
I may be able to help if you PM me, what about the printed cicuit board?
BTW I would go to Radio Shack as a last resort for parts.
AlCNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Reply With Quote
Posting Permissions
