587,167 active members*
3,489 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking > MetalWork Discussion > need a tape to glue metel
Results 1 to 7 of 7
  1. #1
    Join Date
    Jun 2007
    Posts
    4

    need a tape to glue metel

    hello i need to glue little produckts on a plate of aluminium
    i know that dere is a tape i can use that works white hot water
    en to make it loose agane jou have to put it in het water agane

    how can help my sorry my engles is nog zo good

  2. #2
    Join Date
    Aug 2007
    Posts
    7
    Sorry about going off topic. ( I had not heard of such a tape before.)

    While I find your English reasonable easy to understand it's, as you say yourself, not that good.

    I came to think of that even "Google Translate" should produce a text that is better than yours. So I tried to write the same text as you have written in my own language, Swedish, and let "Google Translate" translate it to English.

    The result was this:
    Hi

    I need to glue the small products on an aluminum plate. I know there's a tape I can use that is activated by warm water and loosen again with warm water.

    Can anyone help me? Excuse me, my English is not very good.
    From what I can judge it's quite a lot more correct than your text. I know of two errors, "glue the small products" and "loosen again". And I'm thinking about if it should be "a tape that I can", I would write it like that but I'm not sure that it's correct.

    I hope you don't mind, it's just meant as an advice. Check if "Google Translate" can do a decent translation from your language and use it if you want.

  3. #3
    Join Date
    Jun 2007
    Posts
    4
    Thank you and I do not mind
    Thanks for the tip

    I have a produck that is small and thin
    how can I fix it on my milling machine
    someone has a solution

    google translate works not always :<

    but thanks

  4. #4
    Join Date
    Feb 2012
    Posts
    0
    Perhaps you could post a pic of the item and its size?

    there is double sided tape and there is double sided carpet tape,I have found the carpet tape more powerful than the double sided tape.

  5. #5
    Join Date
    Jan 2011
    Posts
    0

    consider sodium silicate, "water glass"

    it is a strong glue which dissolves in water. aply thinly and warm to set. (water evaporates) Then soak in water short time to loosen.

  6. #6
    Join Date
    Jan 2004
    Posts
    3154
    One4you - you are correct.
    There is a double sided, heat activated "super tape".
    Here is the product link Mitee-Bite Products Co. - Mitee Grip
    It is great stuff
    www.integratedmechanical.ca

  7. #7
    Join Date
    Jan 2011
    Posts
    0

    about language translation

    What is your solution to tape-glue problem?

Similar Threads

  1. DIY CNC Glue Dispenser
    By Leegpx in forum Hobby Discussion
    Replies: 4
    Last Post: 04-30-2012, 06:45 PM
  2. do i need to glue it up? when to paint?
    By forgetcolor in forum Commercial CNC Wood Routers
    Replies: 3
    Last Post: 03-01-2010, 10:50 PM
  3. Which glue for POM Plastics?
    By KevinWilkins in forum Glass, Plastic and Stone
    Replies: 4
    Last Post: 02-06-2010, 09:21 PM
  4. Replies: 8
    Last Post: 04-09-2007, 06:58 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •