Hi there,
I have a Cincinnati arrow 1000 with the acromatic 2100. Ive been having this problem for a while now. After the machine has been on for a couple hours if I put code into the MDI it tells me that I have a syntax error. Even though I've been using the exact same code in the past. It doesnt matter what is entered. It comes up with te same error. The same code will work fine on the program side. It used to be that if I shut the machine down overnight it would go away. Now it doesn't matter. Any input is greatly appreciated.
Thank you
SC
Thread: Block Syntax Error II
Results 1 to 3 of 3
-
05-08-2012, 06:20 AM #1
Registered
- Join Date
- Oct 2009
- Posts
- 28
Block Syntax Error II
-
05-08-2012, 02:45 PM #2
Registered
- Join Date
- Mar 2011
- Posts
- 465
Sounds very similar to a post about a month ago (Alarm 48-72 : Block Syntax Error).
Based on the descriptions I can't say yours is the same problem, but it is similar enough to try the fix I gave him. Delete everything in your MDI screen and retype the code.
-
05-08-2012, 03:25 PM #3
Registered
- Join Date
- Oct 2009
- Posts
- 28
Thanks for your help. I found the previous post. I'll give it a try.
Reply With QuoteSimilar Threads
-
Alarm 48-72 : Block Syntax Error
By t_hum in forum Cincinnati CNCReplies: 5Last Post: 05-08-2012, 03:37 PM -
Where is the syntax error in this Fanuc code?
By idtkid in forum FanucReplies: 15Last Post: 09-27-2009, 07:15 PM -
Auto Tool Zero VBA Code gives Syntax Error
By kiltjim in forum Mach Wizards, Macros, & AddonsReplies: 2Last Post: 02-03-2009, 12:32 AM -
syntax error
By pyroracing85 in forum G-Code ProgramingReplies: 9Last Post: 01-28-2005, 02:09 AM -
Syntax question
By doug6949 in forum MastercamReplies: 2Last Post: 12-13-2004, 08:14 PM
Posting Permissions
