for those with a joe's 2006 machine or similar what software do you use?
for those with a joe's 2006 machine or similar what software do you use?
AutoCAD for drawing, Cut2d for making g-code, and Mach3 for machine control. I will soon be upgrading to v-carve though.
ViaCAD for 3D generation, CamBam for 2.5D and gcode generation, Mach3 machine control. 90% of my pieces are drawn in CamBam, 100% of my gcode is done by CamBam.
Don
Vectric Vcarve Pro and Mach 3
Vcarve Pro and EMC2