Why not pour your efforts into a more productive vein. It does no good to vent your hostility here or anywhere for that matter. Nothing constructive to be gained. Work with your dealer.
No, I've never had delivery and or dealer problem.
No, I have never had a spindle go bad.
No, I've never had any of my machines dump spindle oil on the floor.
No, I've never had the taping problem you had.
No, I'm not stupid enough to climb into a machine under supposedly "Feed Hold." Reset the damn thing before doing any work on it! What does the tag say, "This Machine Automatically Controlled And May Start At Any Time?" My guess is you stalled the spindle and just tried to loosen it without hitting feed hold or anything else.
And lastly, NO, I have not pissed everyone involved off so badly that they probably want to sabotage your machine.
Take an anger management course and try working with your HFO. If not that, get rid of those machine and get others. Either way, you will live longer without the stress!
P.S.: Consider this as replied to you other posts too!
Two Haas VF-2's, Haas HA5C, Haas HRT-9, Hardinge CHNC 1, Bother HS-300 Wire EDM, BobCAD V23, BobCAD V28