[msimpson99]

You might want to read through the long Super-PID thread. THere are plenty of people controlling their rpm with Smoothsteppers and a Super-PID.

Its not that the smoothstepper cant control the speed of the router under certain combinations of hardware. Its the G540, SuperPID, and SmoothStepper that seems to be the issue.

I did read it all and tried every thing on the thread.

I have been able to successfully control the speed of the router with a G540 and SuperPID using a parallel port.

IF anyone has been able to control the speed of the router with the G540, SuperPID, and SmoothStepper I would be real interested in how you got it to work.

I have also contacted both SuperPID and SmoothStepper and am still waiting for a response. Currently my stance (to my CNC builders) is that the SmoothStepper works in every reguard but the one mentioned above.

If this does get resolved I would be happy to test it and update my current projects.

[ger21]

I have been able to successfully control the speed of the router with a G540 and SuperPID using a parallel port.

IF anyone has been able to control the speed of the router with the G540, SuperPID, and SmoothStepper I would be real interested in how you got it to work.

http://www.cnczone.com/forums/853612-post304.html