I have found that I can ruff at 5000 RPM, but if I try to finish at that RPM, my parts look like I cut them with a hacksaw. If I slow down to 4,000 RPM for the finish cuts, all is well.
I have found that I can ruff at 5000 RPM, but if I try to finish at that RPM, my parts look like I cut them with a hacksaw. If I slow down to 4,000 RPM for the finish cuts, all is well.
You can buy GOOD PARTS or you can buy CHEAP PARTS, but you can't buy GOOD CHEAP PARTS.